Residential · Pipes, leaks & valves
Emergency Plumber in Markham
Water on the floor, a sewer backup or no water at all: the first job is stopping the flow, the second is finding the failed part. We talk you to the right valve on the phone, then come and repair it.
- Static and flow pressure read at a hose bib
- Leaks traced with meters and thermal camera
- Copper, PEX and poly-b repairs and replacement
- Main shut-off exercised and labelled
- Licensed plumbers (details on request)
- Price agreed before work
- Call-only, no forms
- Tested before we leave
Signs you need an emergency plumber
Some problems can wait for a weekday morning. Others cannot. A pipe spraying inside a wall, a toilet overflowing with no end in sight, sewage welling up from the floor drain downstairs, or a home with no water at all are the calls we treat as urgent. A smell of gas close to a water heater also belongs on that list, though your first call there should be to Enbridge Gas and, if needed, 911.
A quieter sign is a brown ring on the ceiling that keeps spreading. If the drywall is sagging or dripping, water is pooling above it, and that weight can bring the panel down.
Our routine on the day
The person who answers will ask a few short questions: where the water is coming from, whether you have shut it off, and whether anyone is at risk from wet electrical outlets. Then you get a realistic arrival time, not a wishful one.
On site, the first priority is stopping the water. After that we find the cause, explain what we see, and tell you what a proper repair involves before any work starts. Sometimes the emergency fix is the full fix, such as replacing a split section of copper. Other times we make the home safe tonight and book the permanent repair for daylight, so you can think it over.
Markham houses and what shapes this job
The age of the house matters. Older homes in Markham Village and Unionville may still carry galvanized steel or cast iron, which can crack or crumble when disturbed. Townhouses in Cornell and Cathedraltown often share walls, so a leak can reach a neighbour quickly. Newer builds usually have PEX and a clearly labelled manifold, which tends to make isolation simpler.
Weather plays its part too. January cold snaps bring frozen lines on exterior walls, and heavy spring rain loads up sump pits and sewer laterals across the city. Our basement flooding first-hour guide covers what to do while you wait.
What we bring
The van carries common copper and PEX fittings, shut-off valves, toilet parts, drain machines and a wet vacuum, so most urgent repairs can be finished on the first trip. If a part is unusual, we will say so plainly and tell you when it can be fitted.
Ring us without delay if
- Water is running and you cannot find or turn the main valve.
- Sewage or grey water is coming up through a drain.
- Water is near your electrical panel or outlets.
- You have no water and your neighbours do.
If any of those describe your evening, phone us and keep the line short so we can get moving. For anything that can wait, the full service index lists every type of job we handle.
Townhouses in Cornell and Cathedraltown often share walls, so a leak can reach a neighbour quickly.
From the job notes of Plumbers in Markham
Job card · Pipes, leaks & valves
On the van for this job
- Pipe cutters, propane torch and press tools for copper
- Gauges for static and flow pressure tests
Signs you need this
- The meter dial turns with every tap off
- Flow that falls off when a second tap opens
What we check before we pack up
- Read static pressure at a hose bib
- Pressure-test new pipe before closing walls
| Pipe | Era | Watch for |
|---|---|---|
| Galvanized steel | Pre-1960s | Rust narrows the bore |
| Poly-b (grey) | About 1978 to 1995 | Fitting failures, brittle pipe |
How the job runs, start to finish
- 1
On the phone
Explain what the water is doing and where. We ask the age of the house and which valve or breaker to shut while we drive over.
- 2
Drop cloths down
Floors and cabinets get covered, the water or gas is isolated and the work area is lit.
- 3
Find the failed part
We open the trap, cleanout, access panel or wall where the fault is, and show you what we found.
- 4
Quote, then work
We explain what failed and what the fix costs; no cutting starts until you say yes.
- 5
Cut, fit, seal
Old parts come out, new pipe, valves or fixtures go in, and joints are soldered, pressed, crimped or glued.
- 6
Test and ticket
We run water, pressure-test or fire the heater, check for drips, clean up and leave a written ticket of what was done.